Possible causes
– Faulty Camshaft Position Sensor
– Synchronize Assembly not properly installed.
– Verify the cam sensor is synchronized
– Faulty Powertrain Control Module (PCM)
– Verify input sensor parameters are correct
– Synchronize Assembly not properly installed.
– Verify the cam sensor is synchronized
– Faulty Powertrain Control Module (PCM)
– Verify input sensor parameters are correct
Tech description
Replacing the Camshaft Position Sensor (CMP) usually takes care of the problem, but if the sensor is installed out of synchronization it will produce the P1309 code. If the CMP is installed properly, REPLACE Powertrain Control Module (PCM). RESTORE vehicle. RERUN Quick Test .
When is the obd code mean?
Powertrain Control Module (PCM) disabled the misfire monitor
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1309 FORD OBD Code Description