Description
OBD-II Trouble Code Description for P0114 Porsche
Intake Air Temperature Sensor 1 Circuit Intermittent
What does this mean?
OBD2 Code P0114 Porsche definition:
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
Symptoms
Possible sumptoms of OBD code P0114 Porsche
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0114 Porsche
– Dirty air filter – Intake air temperature (IAT) sensor harness is open or shorted – Intake air temperature (IAT) sensor electrical circuit poor connection – Faulty intake air temperature sensor The Error code is generally activated on detection of the following conditions: The Engine Control Module (ECM) detected an erratic signal from the Intake Air Temperature (IAT) sensor during the system monitor test
Possible Solutions
Check IAT cabling Clean IAT or MAF sensor Replace IAT or MAP sensor
The OBD2 Code Information Be Applicable For Porsche:
2013 Porsche Cayenne,2013 Porsche Boxster S,2013 Porsche Boxster,2013 Porsche 911,2012 Porsche Panamera,2012 Porsche 911,2011 Porsche 911,2010 Porsche Panamera,2010 Porsche Cayenne,2010 Porsche 911 GT3,2009 Porsche 911,2008 Porsche Cayenne,2008 Porsche Boxster,2008 Porsche 911,2007 Porsche Cayman,2007 Porsche Cayman,2007 Porsche Boxster,2007 Porsche Boxster,2007 Porsche 911,2006 Porsche 911,2005 Porsche Boxster S,2005 Porsche Boxster,2005 Porsche 911,2004 Porsche 911,2003 Porsche 911
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Porsche makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.