OBD-II Trouble Code Description for P0011 Saab

“A” Camshaft Position – Timing Over-Advanced or System Performance

What does this mean?

OBD2 Code P0011 Saab definition:
A code P0011 Saab definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 Saab DTC specifically definition:the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The “A” camshaft is either the intake, left, or front camshaft.

Symptoms

Possible sumptoms of OBD code P0011 Saab
Most likely a P0011 Saab DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes

Possible causes of OBD code P0011 Saab
A P0011 Saab DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)

Possible Solutions

This DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer techs have advanced tools and the ability to follow detailed troubleshooting steps, including the ability to test components using a scan tool.

Related Codes

P0010 Saab P0012 Saab P0020 Saab P0021 Saab P0022 Saab