Description
OBD-II Trouble Code Description for P0724 Saab
Brake Switch “B” Circuit High
What does this mean?
OBD2 Code P0724 Saab definition:
This brake switch send a signal to the Engine Control Module (ECM). The signal is used to detect when the brakes have been applied. In some models the brake switch signal voltage is the same as the voltage supplied to the stop lights.
Symptoms
Possible sumptoms of OBD code P0724 Saab
– Engine Light ON (or Service Engine Soon Warning Light) – Stop lights may be inoperative
Causes
Possible causes of OBD code P0724 Saab
– Brake switch harness or connectors – Misadjusted brake light switch – Open or shorted brake switch – Faulty brake light switch The Error code is generally activated on detection of the following conditions: The stop light switch does not turn off even once vehicle is driven.
Possible Solutions
The OBD2 Code Information Be Applicable For Saab:
2012 Saab 9-5,2012 Saab 9-4X,2011 Saab PhoeniX Concept,2010 Saab 9-5 Sedan,2010 Saab 9-3,2010 Saab 9-3X,2008 Saab Turbo X,2008 Saab 9-X,2008 Saab 9-7X,2008 Saab 9-4X,2008 Saab 9-3,2008 Saab 9-3,2008 Saab 9-3,2006 Saab 9-7X,2006 Saab 9-5,2006 Saab 9-3,2005 Saab 9-5,2005 Saab 9-3,2005 Saab 9-2,2003 Saab 95,2003 Saab 93
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Saab makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.