Skoda P0126 Insufficient Coolant Temperature for Stable Operation

Description

OBD-II Trouble Code Description for P0126 Skoda

Insufficient Coolant Temperature for Stable Operation

What does this mean?

OBD2 Code P0126 Skoda definition:
The Engine Coolant Temperature (ECT) sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the Engine Control Module (ECM). The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

Symptoms

Possible sumptoms of OBD code P0126 Skoda
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0126 Skoda
– Low engine coolant level – Engine Coolant Temperature (ECT) sensor harness is open or shorted – Engine Coolant Temperature (ECT) sensor electrical circuit poor connection – Faulty Engine Coolant Temperature (ECT) sensor – Faulty engine coolant thermostat The Error code is generally activated on detection of the following conditions: The voltage sent to Engine Control Module (ECM) from the sensor is not practical, even when some time has passed after starting the engine.

Possible Solutions


The OBD2 Code Information Be Applicable For Skoda:

2013 Skoda Rapid,2013 Skoda Octavia,2013 Skoda Citigo,2011 Skoda Roomster,2011 Skoda Fabia,2010 Skoda Superb,2009 Skoda Superb,2009 Skoda Octavia,2008 Skoda Fabia,2007 Skoda Fabia,2006 Skoda Roomster,2006 Skoda Octavia,2005 Skoda Octavia,2005 Skoda Fabia,2003 Skoda Superb,2003 Skoda Octavia,2003 Skoda Fabia

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Skoda makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.