Description
OBD-II Trouble Code Description for P0141 Skoda
O2 Sensor Heater Circuit
What does this mean?
OBD2 Code P0141 Skoda definition:
This code means that the heated circuit in the oxygen sensor on bank 1 decreases time needed to enter closed loop. As the O2 heater reaches operating temperature, the oxygen sensor responds by switching according to oxygen content of the exhaust surrounding it. The ECM tracks how long it takes for the oxygen sensor to begin switching. It the ECM determines (based on coolant temp) that too much time elapsed before the oxygen sensor began operating properly, it will set P0141 Skoda. See also: P0135 Skoda (Bank 1, Sensor 1).
Symptoms
Possible sumptoms of OBD code P0141 Skoda
You will likely notice poor fuel economy the illumination of the Check Engine Light.
Causes
Possible causes of OBD code P0141 Skoda
A code P0141 Skoda may mean that one or more of the following has happened: open or short to ground in the wiring harness O2 heater circuit wiring high resistance O2 heater element resistance is high Internal short or open in the heater element Note: Typically a failed catalytic converter does not cause this code. You’re more likely to see a P0420 Skoda code for a failed converter.
Possible Solutions
Replace oxygen sensor (cannot repair open or short that occurs internally to sensor) Repair short or open or high resistance in wiring harness or harness connectors
The OBD2 Code Information Be Applicable For Skoda:
2013 Skoda Rapid,2013 Skoda Octavia,2013 Skoda Citigo,2011 Skoda Roomster,2011 Skoda Fabia,2010 Skoda Superb,2009 Skoda Superb,2009 Skoda Octavia,2008 Skoda Fabia,2007 Skoda Fabia,2006 Skoda Roomster,2006 Skoda Octavia,2005 Skoda Octavia,2005 Skoda Fabia,2003 Skoda Superb,2003 Skoda Octavia,2003 Skoda Fabia
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Skoda makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.