Suzuki P0109 Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent

Description

OBD-II Trouble Code Description for P0109 Suzuki

Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent

What does this mean?

OBD2 Code P0109 Suzuki definition:
The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine’s Engine Control Module (ECM). The data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.

Symptoms

Possible sumptoms of OBD code P0109 Suzuki
Engine Light ON (or Service Engine Soon Warning Light) Engine rough idle Engine hesitation

Causes

Possible causes of OBD code P0109 Suzuki
– Manifold Absolute Pressure harness is open or shorted – Manifold Absolute Pressure sensor poor electrical circuit connector – Faulty Manifold Absolute Pressure sensor – Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

Replace and Check any of the Causes listed above

The OBD2 Code Information Be Applicable For Suzuki:

2012 Suzuki Swift Sport,2012 Suzuki Splash,2012 Suzuki S-Cross Concept,2012 Suzuki G70 Concept,2011 Suzuki Swift S Concept,2011 Suzuki Swift,2011 Suzuki Kizashi,2010 Suzuki SX4,2010 Suzuki Kizashi,2009 Suzuki Grand Vitara,2009 Suzuki Alto,2008 Suzuki Splash,2008 Suzuki SXForce Concept,2008 Suzuki SX4 Sedan,2008 Suzuki Kizashi,2008 Suzuki Equator,2007 Suzuki XL7,2007 Suzuki SX4,2007 Suzuki Kizashi,2005 Suzuki Swift

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Suzuki makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.