Suzuki P0226 Throttle Pedal Position Sensor/Switch C Circuit

Description

OBD-II Trouble Code Description for P0226 Suzuki

Throttle/Pedal Position Sensor/Switch “C” Circuit Range/Performance

What does this mean?

OBD2 Code P0226 Suzuki definition:
Electric Throttle Control Actuator consists of throttle control motor, throttle position (TP)sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

Symptoms

Possible sumptoms of OBD code P0226 Suzuki
– Engine Light ON (or Service Engine Soon Warning Light) – No throttle response

Causes

Possible causes of OBD code P0226 Suzuki
– Harness or connector (The TP sensor circuit is open or shorted.) – Electric Throttle Control Actuator (or Throttle Body Motor) – Accelerator Pedal Position Sensor (APP) The Error code is generally activated on detection of the following conditions: An out of range voltage from the Accelerator Pedal Position Sensor (APP) sensor 1 is sent to ECM.

Possible Solutions


The OBD2 Code Information Be Applicable For Suzuki:

2012 Suzuki Swift Sport,2012 Suzuki Splash,2012 Suzuki S-Cross Concept,2012 Suzuki G70 Concept,2011 Suzuki Swift S Concept,2011 Suzuki Swift,2011 Suzuki Kizashi,2010 Suzuki SX4,2010 Suzuki Kizashi,2009 Suzuki Grand Vitara,2009 Suzuki Alto,2008 Suzuki Splash,2008 Suzuki SXForce Concept,2008 Suzuki SX4 Sedan,2008 Suzuki Kizashi,2008 Suzuki Equator,2007 Suzuki XL7,2007 Suzuki SX4,2007 Suzuki Kizashi,2005 Suzuki Swift

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Suzuki makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.