Description
OBD-II Trouble Code Description for P0656 Suzuki
Fuel Level Output Circuit
What does this mean?
OBD2 Code P0656 Suzuki definition:
The PCM controls the fuel gauge through the fuel gauge control circuit. The PCM supplies a pulse width modulated (PWM) duty cycle signal to control the fuel gauge. The PCM receives the fuel level information from the fuel level sensor. The PCM controls the gauge by grounding the control circuit via an internal switch called a driver. The primary function of the driver is to supply the ground for the controlled component. Each driver has a fault line which the PCM monitors. If the fault detection circuit senses a voltage other than what the PCM expects, the fault line status changes causing the DTC to set.
Symptoms
Possible sumptoms of OBD code P0656 Suzuki
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0656 Suzuki
– Fuel level circuit open or shorted – Poor fuel level electrical connection – Faulty PCM
Possible Solutions
The OBD2 Code Information Be Applicable For Suzuki:
2012 Suzuki Swift Sport,2012 Suzuki Splash,2012 Suzuki S-Cross Concept,2012 Suzuki G70 Concept,2011 Suzuki Swift S Concept,2011 Suzuki Swift,2011 Suzuki Kizashi,2010 Suzuki SX4,2010 Suzuki Kizashi,2009 Suzuki Grand Vitara,2009 Suzuki Alto,2008 Suzuki Splash,2008 Suzuki SXForce Concept,2008 Suzuki SX4 Sedan,2008 Suzuki Kizashi,2008 Suzuki Equator,2007 Suzuki XL7,2007 Suzuki SX4,2007 Suzuki Kizashi,2005 Suzuki Swift
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Suzuki makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.