Tag: SAAB

P0716 SAAB Transmission Input/Turbine Speed Sensor Range/Performance

Possible causes – Faulty Transmission Speed Sensor– Transmission Speed Sensor harness is open or shorted– Transmission Speed Sensor circuit poor electrical connection When is the obd code mean? Diagnostic Trouble Code (DTC) P0716 is detected when TCM or ECM does not receive the proper signal from the sensor. Symptoms – Engine Light ON (or Service…

P0171 SAAB System Too Lean Bank 1

Possible causes – Intake air leaks– Faulty front heated oxygen sensor– Ignition misfiring– Faulty fuel injectors– Exhaust gas leaks– Incorrect fuel pressure– Lack of fuel– Faulty Mass Air Flow (MAF) sensor– Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech description If the P0171 is combined with the P0174 code, it’s very likely that the problem…

P0560 SAAB System Voltage Malfunction

Possible causes – Low battery charge– Battery defective– Loose or missing alternator drive belt– Faulty alternator– Open or short system voltage circuit Tech description Start by recharging or replacing the battery. When is the obd code mean? The P0560 code is detected when the Engine Control Module (ECM) voltage out of range. Symptoms – Engine…

P0641 SAAB 5 Volt Reference Voltage Incorrect

Possible causes – Faulty Engine Control Module (ECM)– ECM harness is open or shorted– ECM circuit poor electrical connection– Shorted sensor on 5 volt circuit When is the obd code mean? The Engine Control Module (ECM) has detected the sensor 5 volt reference circuit voltage is higher or lower than expected Symptoms – Engine Light…

P1001 SAAB Evaporative Emission Canister Purge Valve Low Output

Possible causes – Faulty EVAP canister purge valve– EVAP canister purge valve harness circuit open or shorted– EVAP canister purge valve electrical connection When is the obd code mean? The P1001 code is triggered when the ECM has detected an open circuit or short to ground on the EVAP canister purge valve. Symptoms – Engine…