Possible causes
– Harness or connectors (CAN communication line is open or shorted)
– ECM
– ECM
Tech description
Nissan has release service bulletins for this problem. A common cause with Nissan vehicles is the poor harness ground connection at the engine compartment and the ground connection behind the dash. Clean and resecure harness ground connection and reset engine light.
When is the obd code mean?
When detecting error during the initial diagnosis of CAN controller of ECM.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
U1011 NISSAN OBD Code Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.